Product ID:R-373 RUBBER INSUL. ADHESIVE #373
MSDS Date:01/01/1995
FSC:8040
NIIN:00-841-9773
MSDS Number: CCJYC

RUBATEX CORP

805 MONROE ST.
BEDFORD, VA 24523
US

Emergency Phone: 703-586-2611

Info Phone: 703-586-2611

Preparer: CAROL N. BUSH

Cage: IO124

THE CLAREMONT COMPANY

952 MERIDEN, CT 06450 US

Telephone: 800-222-4448 / 203-238-2384

Cage: 52307

TOLUENE (SARA 313) (CERCLA)(VP = 22.0)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 15.0%

OSHA PEL 200 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

HEXANE (N-HEXANE) (CERCLA)(SARA 313)(VP = 140)

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 28.0%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ACETONE (SARA 313) (CERCLA)(VP = 186)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 36.0%

OSHA PEL 750 PPM

ACGIH TLV: 750 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DIZZINESS, BREATHING
DIFFICULTY, HEADACHES, LOSS OF COORDINATION. EYE: SEVERE
IRRITATION, REDNESS, TEARING, BLURRED VISION. SKIN: CAN DRY/DEFAT
CAUSING CRACKS, IRRITATION, DERMATITIS. INGE STION: CAN CAUSE GI
IRRITATION, VOMITING, NAUSEA, DIARRHEA.
Effects of Overexposure:INHALATION: DIZZYNESS, BREATHING DIFFICULTY,
HEADACHES, AND LOSS OF COORDINATION. EYE: SEVERE IRRITATION,
TEARING, REDNESS, BLURRED VISION. SKIN: CAN DRY/DEFAT SKIN CAUSING
CRACKS, IRRITATION, DERMITI TIS. INGESTION: CAN CAUSE
GASTROINTESTINAL IRRITATION, VOMITING, NAUSEA, DIARRHEA.
Medical Cond Aggravated by Exposure:ANESTHESIA, RESPIRATORY TRACT
IRRITATION, DERMATITIS, NAUSEA, VOMITING.

First Aid:INHALATION: MOVE TO FRESH AIR. IF BREAHTING STOPS GIVE
ARTIFICIAL RESPIRATION, GET MED AID IMMED. EYE: FLUSH W/LARGE
AMOUNTS WATER 15 MINUTES. SKIN: WASH THOROUGHLLY W/SOAP & WATER.
GET MED AID. INGES TION: DO NOT INDUCE VOMITING. CAN CAUSECHEMICAL
PNEUMONITIS, EDEMA. CONTACT DR IMMEDIATELY.

Flash Point Method:CC
Flash Point:-14F,-26C
Lower Limits:1.0
Upper Limits:NA
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:RESPIRATORY EQUIPMENT SHOULD BE WORN TO AVOID
INHALATION OF CONCENTRATED VAPORS. WATER SHOULD NOT BE USED EXCEPT
AS FOG TO KEEP NEARBY CONTAINERS COOL.
Unusual Fire/Explosion Hazard:HANDLE AS FLAM LIQ. VAPORS FORM EXPLOSIVE
MIXTURES & AIR BETWEEN UPPER/LOWER EXPLOSIVE LIMITS, CAN BE IGNITED
BY PILOT LIGHTS/FLAME/ELECTRICAL MOTORS/SWITCHES.

Spill Release Procedures:REMOVE IGNITION SOURCES. PROVIDE GOOD
VENTILATION. DIKE SPILL AREA. USE ABSORBENT TO CLEAN UP.

Handling and Storage Precautions:USE NONSPARKING TOOLS WHEN HANDLING.
AVOID HOT METAL SURFACES. USE IN COOL WELL-VENTILATED AREAS. KEEP
CONTAINERS CLOSED WHEN NOT IN USE.
Other Precautions:KEEP AWAY FROM EXCESSIVE HEAT & OPEN FLAMES. NO
SMOKING AROUND MATERIAL. TOOLS USED W/THIS MAT'L SHOULD BE MADE OF
ALUMINUM, BRASS, COPPER. PLASTIC SHOULD NOT BE USED.

Respiratory Protection:WHEN SPRAYING ADHESIVE, USE NIOSH APPROVED
CARTRIDGE RESPIRATOR OR GAS MASK SUITABLE TO KEEP AIRBORNE
MISTS/CONCENTRATIONS BELOW THE TLV/TWA. WHEN USING IN POORLY
VENTILATED AREA USE FRESH AIR SUPPLYI NG RESPIRATOR OR SCBA.
Ventilation:GENERAL MECHANICAL OR LOCAL EXHAUST SHOULD BE SUITABLE TO
KEEP CONCENTRATIONS BELOW TLV. USE EXPLOSION PROOF EQUIPMENT.
Protective Gloves:IMPERMEABLE CHEMICAL HANDLING GLOVES.
Eye Protection:CHEM SAFETY GLASSES/GOGGLES/FACE SHIELD.
Other Protective Equipment:USE IMPERMEABLE APRONS & PROTECTIVE CLOTHING
WHENEVER POSSIBLE TO PREVENT SKIN CONTACT. USE OF HEAD CAPS
STRONGLY REC.
Work Hygienic Practices:EYEWASHES/SAFETY SHOWERS IN WORK PLACES
RECOMMENDED.
Supplemental Safety and Health
NK

Boiling Pt:B.P. Text:132 TO 231F
Vapor Density:>AIR
Spec Gravity:0.8
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NO
Appearance and Odor:BLUE, OFFENSIVE ODOR

Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIALS, STRONG ACIDS, OXIDIZING MATERIALS.
Stability Condition to Avoid:EXCESSIVE HEAT, POOR VENTILATION,
CORROSIVE ATMOSPHERE, EXCESSIVE AGING.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN, POSSIBLE ACROLEIN.

Waste Disposal Methods:COLLECT ABSORBENT/SPILLED LIQ MIXTURE, PLACE
INTO METAL CONTAINERS. CONSULT LOCAL, STATE, FEDERAL HAZARDOUS
WASTE REGS BEFORE DISPOSING INTO APPROVED HAZARDOUS WASTE LANDFILL.
OBEY RELEVANT LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.